2C9/ 2D9 Reducer Tube Adapter With Swivel Nut Elbow hydraulic Fitting
(DIN 2353 DIN 3865 )
- DIN Hydraulic Fittings
- BSP Thread Adapter
- JIC Hydraulic Adapters
- Metric Hydraulic Adapters
- SAE Flange Adapter
- Hydraulic Hose Fittings JIC
- BSP Hydraulic Fittings
- Metric Hydraulic Hose Fittings
- SAE Flange Fittings
- Reusable Hose Fittings
- Interlock Hose Fittings
- Socketless Hose Fittings
- Hydraulic Hose Ferrule
Note:In case if you are interested to order the adapter in complete set with cutting ring
and nut ,it is necessary to insert suffix "RN" after our part no.,for example 2C9-22RN.
BITE TYPE TUBE FITTINGS INSTRUCTIONS:
- Bite type fitting consists of three parts: body, cutting ring and nut. When tightening nut, cutting ring is driven forward on the tube then bites the tube with the edge of cutting ring, this is how sealing is achieved and results in internal ridge inside the tube.
- The tube connection side of fitting is manufactured in accordance with standard: DIN 3865.
- In general, body and nuts' surface is plated zinc. Bite type fitting can be used in system with Max 63MPa. The connection tube OD is Max 42mm.
We are specialized in all kinds of hydraulic hose fittings, adapters, ferrules, flanges.
We can provide OEM service and develop new products according to customer's drawings and samples.
- Material: carbon steel, stainless steel, brass, etc.
- Surface treatment: Zinc plated, Zn-Ni plated, Cr3, Cr6 plated
- Standard:SAE, DIN, ISO, BS.
- Thread: metric, bsp, bspt, npt, jic, sae, orfs, npsm, etc.
